目录
1、View生命周期以及View层级
1.1、View生命周期
View的主要生命周期如下所示, 包括创建、测量(onMeasure)、布局(onLayout)、绘制(onDraw)以及销毁等流程。
自定义View主要涉及到onMeasure、onLayout和onDraw这三个过程,其中
(1)自定义View(继承自View类):主要实现onMeasure和onDraw,
(2)自定义ViewGroup(继承自ViewGroup类):主要实现onMeasure和onLayout。
1.2、View层级
View层级是一个树形结构。
onMeasure、onLayout和onDraw这三个过程都是按照View层级从上到下进行的:(1)ViewGroup主要负责onMeasure和onLayout,确定自身及其子View的大小和放置方式,例如LinearLayout通过onMeasure确定尺寸,通过onLayout对子View进行横向或者纵向布局;(2)View主要负责onMeasure和onDraw,例如TextView通过onMeasure确定自身尺寸,通过onDraw绘制文字。2、View测量与MeasureSpec类
View测量中最难的一点就是如何根据View的LayoutParams参数确定其实际的宽高,如:
android:layout_width="10dp"android:layout_width="match_parent"android:layout_width="wrap_content"
这三种情况,View的宽度究竟应该是多少?这就要从View的测量过程分析了,
2.1、MeasureSpec类
View类的内部类MeasureSpec用来辅助View的测量,使用一个int型变量measureSpec来表示View测量的模式和具体的尺寸(宽和高各一个measureSpec值)。measureSpec共32位,用高两位表示测量模式mode, 通过MeasureSpec.getMode(measureSpec)计算获得, 低30位表示尺寸size,通过MeasureSpec.getSize(measureSpec)计算获得。
mode共有三种情况:
MeasureSpec.UNSPECIFIED:不对View大小做限制,系统使用
MeasureSpec.EXACTLY:确切的大小,如:10dp MeasureSpec.AT_MOST:大小不可超过某数值,最大不能超过其父类2.2、父View的限制 :测量约束,限制最大宽度、最大高度等
View的测量过程受到父View的限制,如对一个ViewGroup测量时,其高度测量模式mode为EXACTLY,高度尺寸size为100dp,其子View的高度测量依据对应的android:layout_height参数来确定:
(1)具体尺寸值,如50dp,则该子View高度测量中mode为EXACTLY,尺寸为50dp;
(2)match_parent,则该子View高度和其父View高度相同,也是确定的,高度测量中mode为EXACTLY,尺寸为100dp;
(3)wrap_content, 则该子View最大高度为100dp, 确切高度需要根据内部逻辑确定,像TextView需要根据文字内容、宽度等综合确定,于是高度测量中mode为AT_MOST, 尺寸size为100dp。
其他情况类似,如父View的mode分别为AT_MOST、UNSPECIFIED,具体见下表:
高度测量中mode和size确定后,可通过MeasureSpec.makeMeasureSpec(size, mode)来确定heightMeasureSpec,widthMeasureSpec使用同样的方法确定。该方法的具体实现为ViewGroup.getChildMeasureSpec()方法。2.3、子View的影响:实际测量
测量过程以LinearLayout作为例子说明:
(1) LinearLayout根据父View的measureSpec以及自身的LayoutParams确定了自身的widthMeasureSpec、heightMeasureSpec后, 调用measure(widthMeasureSpec, heightMeasureSpec) -----> onMeasure(widthMeasureSpec, heightMeasureSpec)来进行实际的测量;
(2) 当该LinearLayout方向为vertical时,实际测量中应该计算所有子View的高度之和,作为LinearLayout的测量高度needHeight;
(3) heightMeasureSpec中size为父类给该LinearLayout的限制高度,根据heightMeasureSpec中mode判断是取needHeight, 还是heightMeasureSpec中size, 然后调用setMeasuredDimension将测量的高度和宽度设置进去。
2.4、View的测量过程
Android中View测量是一种递归的过程(见下图),首先View调用measure方法,内部调用了自身的onMeasure方法,这个方法内部调用子View的measure方法(子View同样会调用自身的onMeasure方法),对子View进行测量,保存子View的测量尺寸,测量完所有的子View后再对自身测量,保存测量尺寸,之后便可以通过View.getMeasuredWidth()和View.getMeasuredHeight()来获取View的测量宽高。
3、自定义流式布局FlowLayout
主要思路:
对FlowLayout的所有子View逐个进行测量,获得measuredHeight和measuredWidth,在水平方向上根据这个尺寸依次对View进行放置,放不下则另起一行,每一行的高度取该行所有View的measuredHeight最大值。
3.1、单个子View测量
对其指定子View----child的测量代码如下,其中paddingLeft、paddingRight、paddingTop、paddingBottom分别是FlowLayout四边上的padding,widthMeasureSpec以及heightMeasureSpec是FlowLayout中onMeasure中的两个参数。
int childWidthSpec = ViewGroup.getChildMeasureSpec(widthMeasureSpec, paddingLeft + paddingRight, child.getLayoutParams().width);int childHeightSpec = ViewGroup.getChildMeasureSpec(heightMeasureSpec, paddingTop + paddingBottom, child.getLayoutParams().height);child.measure(childWidthSpec, childHeightSpec);
于是子View的测量宽、高分别可以通过child.getMeasuredWidth() 和child.getMeasuredHeight()来进行获得。
3.2、onMeasure:测量与模拟布局View
//子View的横向间隔、纵向间隔 private final int horizontalSpace = dp2px(20); private final int verticalSpace = dp2px(10); //保存测量的子View, 每一个元素为一行的子View数组 private final List<List<View>> allLines = new ArrayList<>(); //记录每一行的最大高度,用于布局 private final List<Integer> heights = new ArrayList<>(); @Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { allLines.clear(); heights.clear(); int paddingLeft = getPaddingLeft(); int paddingRight = getPaddingRight(); int paddingTop = getPaddingTop(); int paddingBottom = getPaddingBottom(); int usedWidth = 0; int height = 0; //父布局对FlowLayout的约束宽高 int seftWidth = MeasureSpec.getSize(widthMeasureSpec) - paddingLeft - paddingRight; int seftHeight = MeasureSpec.getSize(heightMeasureSpec) - paddingTop - paddingBottom; //FlowLayout的测量宽高 int needHeight = 0; int needWidth = 0; List<View> line = new ArrayList<>(); int count = getChildCount(); for (int i = 0; i < count; i++) { View child = getChildAt(i); int childWidthSpec = ViewGroup.getChildMeasureSpec(widthMeasureSpec, paddingLeft + paddingRight, child.getLayoutParams().width); int childHeightSpec = ViewGroup.getChildMeasureSpec(heightMeasureSpec, paddingTop + paddingBottom, child.getLayoutParams().height); child.measure(childWidthSpec, childHeightSpec); if (usedWidth + horizontalSpace + child.getMeasuredWidth() > seftWidth) { //当前行无法在放下下一个view,则保存当前行的Views集合以及当前行的最大高度, heights.add(height + verticalSpace); allLines.add(line); //所有行的最大宽度 needWidth = Math.max(needWidth, usedWidth); //所有行的高度之和 needHeight += height + verticalSpace; //重置下一行的使用宽度、高度、View集合 usedWidth = 0; height = 0; line = new ArrayList<>(); } //获取当前行的最大高度,作为当前行的高度 height = Math.max(height, child.getMeasuredHeight()); //记录已经使用的宽度(第一个元素不需要加横向间隔 usedWidth += child.getMeasuredWidth() + (line.size() == 0 ? 0 : horizontalSpace); //保存已经测量及模拟布局的View line.add(child); //记录最后一行的数据 if (i == count - 1) { heights.add(height + verticalSpace); allLines.add(line); needWidth = Math.max(needWidth, usedWidth); needHeight += height + verticalSpace; } } int widthMode = MeasureSpec.getMode(widthMeasureSpec); int heightMode = MeasureSpec.getMode(heightMeasureSpec); //如果mode为MeasureSpec.EXACTLY, 则使用widthMeasureSpec中的size, //不然使用测量得到的size, 宽高同理 int realWidth = widthMode == MeasureSpec.EXACTLY ? seftWidth : needWidth; int realHeight = heightMode == MeasureSpec.EXACTLY ? seftHeight : needHeight; //保存测量的宽和高 setMeasuredDimension(realWidth + paddingLeft + paddingRight, //如果只有一行,不需要纵向间隔 realHeight + paddingTop + paddingBottom - (allLines.size() > 0 ? verticalSpace : 0)); }
3.3、布局:onLayout
@Override protected void onLayout(boolean changed, int l, int t, int r, int b) { int left = getPaddingLeft(); int top = getPaddingTop(); for (int i = 0; i < allLines.size(); i++) { List<View> line = allLines.get(i); for (int j = 0; j < line.size(); j++) { View child = line.get(j); child.layout(left, top, left + child.getMeasuredWidth(), top + child.getMeasuredHeight()); //一行中View布局后每次向后移动child的测量宽 + 横向间隔 left += child.getMeasuredWidth() + horizontalSpace; } //每一行布局从paddingLeft开始 left = getPaddingLeft(); //布局完成一行,向下移动当前行的最大高度 top += heights.get(i); } }
3.4、测试
测试代码如下:
private final List<String> words = Arrays.asList("家用电器", "手机", "运营商", "数码", "电脑", "办公", "电子书", "惠普星系列高清一体机", "格力2匹移动空调"); @Override public void onCreate(@Nullable Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.layout_flow); FlowLayout layout = findViewById(R.id.flow_layout); for (int i = 0; i < words.size(); i++) { TextView textView = new TextView(this); textView.setText(words.get(i)); textView.setBackground(ContextCompat.getDrawable(this, R.drawable.round_background)); textView.setLayoutParams(new ViewGroup.LayoutParams( ViewGroup.LayoutParams.WRAP_CONTENT, FlowLayout.dp2px(60))); //textView.setLayoutParams(new ViewGroup.LayoutParams( // ViewGroup.LayoutParams.WRAP_CONTENT, // ViewGroup.LayoutParams.WRAP_CONTENT)); int padding = FlowLayout.dp2px(5); textView.setPadding(padding, padding, padding, padding); layout.addView(textView); } }
效果图: